Golf Simulator Installation

Golf Simulator Installation in Southlake, TX

Custom indoor golf simulators designed and installed for Tarrant County homeowners.

  1. 1 Pick your space
  2. 2 Choose your gear
  3. 3 Get your price
Design Your Room

Free to use · real install pricing in minutes

Free Quote

Prefer we handle it? Get a free quote.

Tell us about your space and we'll send back a design and a price. No pressure, no commitment.

Golf Simulator Installs in Southlake

Southlake sits at the top of North Texas — Carroll ISD, Town Square, and some of the largest custom homes in the Metroplex. Most of the houses we look at here run big: 4,000 to 8,000-plus square feet on generous lots in neighborhoods like Timarron, Carillon, Clariden Ranch, Shady Oaks, and the Estates at Southlake. That kind of home usually has the one thing a golf simulator needs most — room to swing — you just have to know where to put it.

In a Southlake build, the space almost always comes down to three candidates: a bonus or game room over the garage, a finished-out portion of an oversized three- or four-car garage, or a dedicated flex room on the first floor. The catch is ceiling height. Two-story great rooms and first-floor rooms in these custom homes often carry 10-foot ceilings, which is ideal, but bonus rooms tucked under a roofline can pinch down to 8 feet or slope off at the edges. We measure the true clear height at the tee before anything else — a driver needs more headroom than most people expect.

The North Texas climate is the whole argument for indoor golf here. Summer afternoons push past 100 degrees for weeks at a stretch, and the occasional winter ice storm shuts the courses down entirely. A simulator turns a Southlake garage or game room into a year-round tee box that doesn’t care what August is doing outside.

Most Southlake neighborhoods run an HOA, and the city requires permits for electrical and structural work, so we scope both up front. Every Pop’s install is measured on-site, framed to spec, and calibrated before we leave — not a kit propped up in the corner.

Southlake's luxury homes and passion for the game make it one of our most requested service areas in DFW.

Pops Indoor Golf specializes in custom simulator installations built around your space, your game, and your budget. From enclosure fabrication to launch monitor calibration, we handle every detail — design, sourcing, build, and setup — for Southlake homeowners throughout Tarrant County.

We work with families across Southlake and the greater Dallas–Fort Worth area who want a simulator that actually fits their home, not a box-store kit propped up in a garage. Every install is measured on-site, framed to spec, and calibrated before we leave.

Planning your build? Check your space against our room & ceiling requirements, and see transparent pricing for what a Southlake installation actually costs.

Why Southlake Homeowners Choose Pops

Local Experts

We're based in Texas and know the market, the homes, and the garages — we're not a national franchise sending out-of-state crews.

Full-Service Install

Design, build, and calibration — all in one. We handle every step from initial measurement to final swing calibration on install day.

Every Budget

Packages from $15,000 to custom builds with no ceiling. We'll tell you honestly what makes sense for your space and how you play.

Our Work

Real Dallas–Fort Worth installs

Real simulator builds our Texas team has installed around Dallas–Fort Worth.

View all Dallas–Fort Worth installs

Serving Southlake and Surrounding Areas

In addition to Southlake, we serve Colleyville, Keller, and Trophy Club and the broader Dallas–Fort Worth area.

Service area ZIP codes: 76092, 76051

Nearby cities we serve:

Frequently Asked

Golf Simulators in Southlake: FAQs

Yes — Pops Indoor Golf designs and installs custom golf simulators throughout Southlake in Tarrant County, Texas. Every install is measured on-site, framed to spec, and calibrated before we leave — no box-store kit propped up in a garage.
Most Southlake installs range from around $15,000 for a complete entry-level setup to fully custom builds with no ceiling. Your quote depends on your room, the launch monitor and enclosure you choose, and any modifications your space needs — we itemize all of it up front, no surprises.
In addition to Southlake, we install simulators in Colleyville, Keller, and Trophy Club and across the greater Dallas–Fort Worth area. Our Southlake service area covers ZIP codes 76092, 76051.
In most Southlake homes it's a toss-up between the bonus room over the garage, a finished section of an oversized garage, or a first-floor flex room. The deciding factor is almost always clear ceiling height — you want a true 9 to 10 feet at the hitting spot. First-floor rooms in these custom builds often have it; bonus rooms under the roof can slope or come in low, so we measure the actual clearance on-site before we commit to a layout.
For a room that already exists, the simulator equipment itself doesn't require a permit — but if your build adds electrical circuits, structural framing, or HVAC changes, the City of Southlake will want those permitted, and we plan for that in the scope. Most Southlake neighborhoods also have an HOA; interior work is typically your business, but it's worth a quick check of your covenants if anything touches the exterior. We flag both during the on-site consult.
Often, yes. A lot of Southlake homes have three- and four-car garages with a bay or a deep back wall to spare, and we can design a setup that folds up or shares the space. The trade-offs are ceiling height and climate — many garages here aren't fully conditioned, so we'll talk through insulation and a mini-split if you want it comfortable to play in July.
Ready?

Ready to Build Your Simulator in Southlake?

Tell us about your space and we'll come back with a design and price estimate. No commitment, no pressure.

Get a Free Quote