Golf Simulator Installation

Golf Simulator Installation in University Park, TX

Custom indoor golf simulators designed and installed for Dallas County homeowners.

  1. 1 Pick your space
  2. 2 Choose your gear
  3. 3 Get your price
Design Your Room

Free to use · real install pricing in minutes

Free Quote

Prefer we handle it? Get a free quote.

Tell us about your space and we'll send back a design and a price. No pressure, no commitment.

Golf Simulator Installs in University Park

University Park is one of the two Park Cities — a fully built-out town wrapped by the city of Dallas and home to SMU. The housing is a mix we know well: original 1920s-to-1940s Tudors, Georgians, and cottages on classic Park Cities lots, sitting right next to full teardown-and-rebuilds. Those two kinds of house give you very different rooms to work with for a golf simulator.

Lots here are generous but not sprawling — many run 50 to 75 feet wide — so space is more of a puzzle than it is out in the big-lot suburbs. In an original home, the strongest candidates are usually a rear garage or the quarters above it (a Park Cities staple, thanks to all the alley-loaded detached garages), or a finished attic or bonus space. In a newer rebuild you’ll often find a proper game room, a first-floor flex room, or an oversized attached garage framed with real ceiling height.

Ceiling height is the make-or-break number, and it’s where older UP homes need the most care. Attic and second-floor spaces can pinch under the roofline or slope at the edges, and a driver needs more clearance than most people guess. We measure the true clear height at the hitting spot before designing anything — never assuming an 8-foot room will do.

The North Texas weather is the whole case for indoor golf: 100-degree summers that stretch for weeks, plus the occasional winter ice storm that closes the courses outright. Because University Park runs its own building department, we scope any electrical, framing, or HVAC work up front. Every Pop’s install is measured on-site, framed to spec, and calibrated before we leave.

University Park's affluent, golf-centric culture and premium home values make it one of the top markets for custom simulator installations in Dallas.

Pops Indoor Golf specializes in custom simulator installations built around your space, your game, and your budget. From enclosure fabrication to launch monitor calibration, we handle every detail — design, sourcing, build, and setup — for University Park homeowners throughout Dallas County.

We work with families across University Park and the greater Dallas–Fort Worth area who want a simulator that actually fits their home, not a box-store kit propped up in a garage. Every install is measured on-site, framed to spec, and calibrated before we leave.

Planning your build? Check your space against our room & ceiling requirements, and see transparent pricing for what a University Park installation actually costs.

Why University Park Homeowners Choose Pops

Local Experts

We're based in Texas and know the market, the homes, and the garages — we're not a national franchise sending out-of-state crews.

Full-Service Install

Design, build, and calibration — all in one. We handle every step from initial measurement to final swing calibration on install day.

Every Budget

Packages from $15,000 to custom builds with no ceiling. We'll tell you honestly what makes sense for your space and how you play.

Our Work

Real Dallas–Fort Worth installs

Real simulator builds our Texas team has installed around Dallas–Fort Worth.

Golf simulator media room installation in Dallas, Texas

Media Room · Dallas, TX · TrackMan

View all Dallas–Fort Worth installs

Serving University Park and Surrounding Areas

In addition to University Park, we serve Highland Park, Dallas, and Richardson and the broader Dallas–Fort Worth area.

Service area ZIP codes: 75205

Nearby cities we serve:

Highland Park Dallas Richardson
Nearby Service Areas

Golf Simulator Installation Across Dallas–Fort Worth

Pops installs simulators throughout the Dallas–Fort Worth metro. Explore other cities we serve near University Park:

Allen Argyle Arlington Bartonville Bedford Burleson Carrollton Celina Colleyville Coppell Dallas Denton Euless Flower Mound Forney Fort Worth Frisco Garland Grapevine Highland Park Hurst Irving Keller Lewisville Lucas Mansfield McKinney Murphy North Richland Hills Plano Prosper Richardson Roanoke Rockwall Rowlett Southlake Trophy Club Westlake Wylie

View all Dallas–Fort Worth locations

Frequently Asked

Golf Simulators in University Park: FAQs

Yes — Pops Indoor Golf designs and installs custom golf simulators throughout University Park in Dallas County, Texas. Every install is measured on-site, framed to spec, and calibrated before we leave — no box-store kit propped up in a garage.
Most University Park installs range from around $15,000 for a complete entry-level setup to fully custom builds with no ceiling. Your quote depends on your room, the launch monitor and enclosure you choose, and any modifications your space needs — we itemize all of it up front, no surprises.
In addition to University Park, we install simulators in Highland Park, Dallas, and Richardson and across the greater Dallas–Fort Worth area. Our University Park service area covers ZIP codes 75205.
Often, yes — and it's one of the more common setups we look at in the Park Cities, because so many UP homes have a detached, alley-loaded rear garage with living quarters above it. The two things we check first are clear ceiling height at the hitting spot and whether the space is conditioned. A lot of these older garages and quarters aren't fully heated and cooled, so if you want it comfortable to play in July we'll talk through insulation and a mini-split as part of the scope.
Frequently, yes, but it comes down to the actual measured clearance, not the room's footprint. Original UP homes and their attic or second-floor spaces can slope under the roofline or come in under 9 feet, which changes the layout and the screen setup. We measure the true clear height at the tee on-site before committing to anything, and in a lot of cases there's a better-suited room in the house — a first-floor space or the garage — than the one people first have in mind.
The simulator equipment in an existing, finished room generally doesn't. But University Park runs its own building department and permits electrical, structural, and HVAC work, so if your build adds circuits, framing, or conditioning we plan for that permitting up front rather than after the fact. We flag exactly what applies during the on-site consult.
Ready?

Ready to Build Your Simulator in University Park?

Tell us about your space and we'll come back with a design and price estimate. No commitment, no pressure.

Get a Free Quote